The VEXO1xx series are high-performance, compact 2-way loudspeakers and come in 4 different models (active or passive). The low-frequency transducer, made of high-quality materials, is combined with a 1.4” (VEXO108) or 1.7” (VEXO110, VEXO112 and VEXO115) moving-coil compression driver, allowing for high SPLs and a tight driver response with a 90° x 70° rotatable coverage pattern for a wide range of applications.

Thanks to its unique driver composition, the VEXO112 delivers clear, natural sound with an RMS power of 400 watts and a peak power of 1600 watts. The frequency response (±3 dB) ranges from 58 Hz to 20 kHz, and sensitivity (1 W/1 m) reaches 99 dB, while a maximum continuous sound pressure level of 125 dB can be achieved.

When not in use, the active versions of VEXO series devices automatically enter a power-saving standby mode. This means the active versions can also be used in fixed installations, as they don't need to be physically turned off after each use.

The cabinets are constructed from 15mm plywood with a polyurethane coating, making them impact-resistant. The front of the cabinet is finished with a powder-coated steel grille and acoustic foam. A recessed carrying handle at the rear makes transport easy. Speaker positioning and suspension are easily achieved using the standard 35mm pole adapter on the bottom and M10 mounting points. Two speaker connectors provide reliable connections with easy attachment to the cabinets.

The optional Clever U bracket allows the high-power 2-way cabinet to be mounted either horizontally or vertically. A tilt of -90° to +35° ensures optimal positioning. The optional MBK bracket even allows the VEXO series to be mounted in a ceiling, providing the opportunity to install the speaker cleanly in any environment.

By installing the optional ANI44XT Dante™ audio network interface on the active speaker, the VEXO series can be integrated into any Dante-enabled AV network and transfer digital audio with any compatible solution on the market.

When the ANI44XT is installed, the VEXO series will be compatible with AUDAC Touch™ and TouchLink™. This is used to create virtual zones by linking multiple compatible devices together. In AUDAC Touch™, you can select multiple amplifier channels that should respond to the user as a single zone.

The VEXO112A features the unique WaveDynamics™ innovation. Powered by this DSP processor, the audio processing and control technology allows any user to effortlessly control the most advanced acoustic settings. The built-in DSP allows for presets for custom, satellite, and full-range configurations and can be loaded via the USB slot on the back of the device. The AUDAC Touch™ app allows for EQing and creating custom presets and controlling equipped VEXO speakers. By installing the ANI44XT, all presets and custom settings can be adjusted from anywhere, at any time.

• Compatible with AUDAC Touch™
• Compatible with TouchLink™
• Dante™/AES67 expansion port
• Advanced DSP and speaker management
• Powerful sound experience
• High sound pressure levels with strict driver response
• Modern and elegant design
• DuraCoat™ Textured Paint
• Impact resistant
• Horizontal and vertical mounting
• WaveDynamics™ compatible