Skip to content
MFA216

MFA216

by AUDAC
Sold out
$ 20,876.18
MEASURES
Color: N/A

MFA216 (PZA)

All-in-one audio solution: 2 x 80 W at 4 ohms - 160 W at 70/100 V

  • 1 x SourceCon™ interface card slots
  • Compatible with AUDAC Touch™
  • Compact design
  • Advanced DSP and speaker management
  • WaveDynamics™ Speaker and TV Configurations
  • Automatic update function (OTA)
  • RS485 and TCP/IP controllable
  • Dante™/AES67 expansion port
  • Amplifier Link Inputs and Outputs
  • Near-zero latency (100 ms) when playing priority messages via Dante™/AES67

"All-in-one audio solution."

This revolutionary, award-winning amplifier is designed as a two-channel amplifier utilizing Class D amplifier technology. It can be used to power low impedance stereo systems with a maximum power of 2 x 80 watts, while it is possible to bridge to constant voltage (100 V and 70 V) with a maximum output power of 160 watts. A switching power supply allows a wide range of main voltages for global compatibility.

The integrated SourceCon™* module slot allows the implementation of any available compatible module, offering a true all-in-one solution. Typical applications are the implementation of an audio streaming module or an Internet radio module. Additionally, a stereo line input allows the connection of any type of external audio source.

A balanced microphone/line input allows connection of a condenser microphone-compatible announcement microphone using the built-in phantom power supply (15V). A priority switch overrides background music when enabled, and compatibility with line-level sources (e.g., voice file players) is ensured by a wide gain adjustment (0 dB ~ +50 dB). This gain setting controls the sensitivity of both the front and rear line inputs. Thanks to the 2.8" TFT display and the rotary push-button dial on the front, an unparalleled user experience is achieved.

Please note that the RCA input is combined with the line input on the back of the device, meaning the rear input is disabled when the front input is in use.

A line-out connection on the back of the device makes it even more versatile. This line output can be used as a preamp output, where the input and volume are the same as those of the internal amplifier, or as a separate secondary stereo zone output, where both zones (inputs, volume control, and more) can be operated completely independently of each other.

A priority mute contact on the back of the device mutes the music in the presence of a contact closure between both terminals. Priority enabled on the microphone input overrides muting, allowing emergency announcements or voice messages.

The MFA series is controllable via RS232, RS485 and TCP/IP, allowing for implementation with home and industrial automation systems and peripheral devices. Using the freely available AUDAC Touch™ 2 app, control and configuration can be performed from any portable or non-portable device, in any location and at any time.

Desktop installation or mounting in an equipment rack is possible using the MBS1xx series mounting adapters. The 19” half-rack enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack.

When the optional ANI44XT Dante™ Audio Network Interface is installed, music from the installed SourceCon™ module or connected line input signal can be shared over your Dante™ audio network with other compatible devices or amplifiers. With Dante™, you can even play priority messages with near-zero latency (100 ms) to your audience.

*SourceCon™ modules are optionally available. The MFA series does not come pre-installed with one of these modules.

*Automation tool: The MFA series does not have built-in relays, it will only be possible to send commands via AUDAC Touch™ to other TCP-IP products. Two-way communication between devices is not possible.