CM62-EZS-II-BK
The next-generation version of the CM62-EZ with enhanced and additional features. Designed for applications with limited plenum space, incorporating a SoundTube-specific shallow backcan with an installed depth of only 3.5 inches. A 6.50 in (165.0 mm) treated fiber woofer with fabric surround and a 1.00 in (25.4 mm) silk dome tweeter. Easy access to six 25/70.7/100-volt tap positions and a 16 ohm tap transformer allows for easy ordering, stocking, and installation. Reduced amplification costs with maximum efficiency, including 90.5 dB sensitivity and 16 ohm impedance. Superior speech intelligibility with a 10 kHz coverage angle of 80 (independently verified). The cost-effective 16 ohm configuration allows the use of multiples of two, four, or six speakers in a single system using a standard amplifier without a prior trans. It incorporates a painted steel grille for long-lasting durability. The ceramic input terminal accepts up to 10 gauge plenum-rated wire leads and includes a thermal fuse. Suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. EN54-24 listed. Adaptable to material thicknesses ranging from 0.04 in (0.9 mm) to 1.60 in (44.6 mm). UL 1480 (UEAY) and 2043, cUL, CE (MEM Directive 89/366/EEC, EN55020, EN55013) approved. IP Rating: IPX3.
| Color | Black |
|---|---|
| UPC | 752830442481 |
| Manufacturer | SoundTube |
| Manufacturer Category | CM-EZ Economical Ceiling |
| Shipping weight | 9.15 lbs / 4.15 kg |
| Carton Height | 6.25 in 158.75 mm |
| Carton Length | 13 in 330.2 mm |
| Carton Width | 13 in 330.2 mm |
| Certifications | CE, EN54, RoHS, UL1480A, UL2043 |
| Enclose Properties | ABS Glass Fiber reinforced, injected molded, sealed |
| Closing volume | 350 cu in / 5735.47 cu cm |
| Included accessories | Conduit Clamp, Cover Plate, Grille, Paint Mask, Choose from a tile bridge or pre-construction braces |
| Optional accessories | Black Grille (GRL-CM6/8EZ-II-BK) Tuter Bridge (AC-CMEZ6/8-TB) - Purchase Bracket (AC-CMEZ6/8-PCB) |
| Source of entries | 4 Pin Ceramic Terminal |
| IP Rating | IPX3 |
| TAA Compliant (Trade America) | No no |
| BAA Compliant (Made in USA) | No no |
| Backcan Diameter | 9.67 in / 245.6 mm |
| Backcan Height | 3.25 in / 82.5 mm |
| Coverage angle (6dB, 2kHz) | 140th. |
| Crossover frequency | 4.0 kHz |
| Cutout Width/Diameter | 10.5 in 266.7 mm |
| Directivity Factor (Q) (Atropexance 100Hz - 10kHz, 2kHz) | 5.1 and 5 |
| Directivity Index dB (Averaged 100Hz - 10kHz, 2kHz) | 6.2dB and 7.0dB |
| Frequency response (at 10 dB) | 75 Hz - 22 kHz |
| Frequency response (- 3 dB) | 135 Hz - 20 kHz |
| Grille Properties | Black, Standard-Flange, Friction-Fit, Paintable, Painted, Steel |
| Low frequency voice coil | 1 in / 25.4 mm |
| Underpass Crossing | 12 dB per eighth order |
| - Max. Roof thickness | 1.6 in / 40.6 mm |
| - Max. RMS lumens of continuous power | 50W |
| - Max. Program Power | 100 W |
| Minimum impedance | 17.9 . |
| Minimum roof thickness | 0.04 in / 0.9 mm |
| Network Type: High Pass | 6 dB per octave 1st order |
| Nominal impedance | 16 |
| Tweeter Driver | 1" Silk Dome |
| Woofer Driver | 6.5" Traido Fiber Cone w/ Wrap Clothing |
| Sensitivity dB 1W/1M | 90 dB |
| Sensitivity dB 2.83V/1M | 87.5 dB |
| Tape selector | Rotation change |
| Transformative options | 25 / 70.7 / 100 V, 16 Ohm direct |
| Transformer crushes to Max. Position (25V/70.7V/100V) | 4W/32W/32W |