POWER SEQUENCING AND CONTROL (PZA)
Single-sequence power distribution module
15 amp with remote control capability
The CQ 50 is a convenient addition to the CQ product series. It works just like the other CQ models with plug-and-play simplicity, easily mounting on any stable surface and plugging into any fifteen-amp AC receptacle. The two switched outlets turn on with a single sequence event. Like other models in the CQ Series, the CQ 50 has a sequence signal line input and output port that allows it to be daisy-chained with any number of other CQ devices or triggered with an RC5 accessory or a locking contact closure.
With the CQ 50, AV installations can be designed without rack equipment and controlled with a simple wall-mounted key switch. The growing popularity of integrating a range of AV equipment into a power control “network” has created the need for distributed power control. Powered speakers, projectors, and other non-rack mounted equipment can be powered on and off with the CQ 50 from the FOH location.
The CQ 50 consists of a small metal enclosure, three NEMA 5-15R receptacles (two switched in a single-sequence event and one unswitched), two RJ45 control line ports, a circuit breaker, a detachable power cord, and circuitry for complete power control coordination with other CQ devices in series or a remote trigger.
Once the CQ 50 is connected to AC mains power and the eight-wire RJ-45 style CQ control cable is inserted into the input port, the device is ready for remote power control. That's all!