IP200UHD-RX (PZA)

IP multicast UHD video receiver over a 1 Gb network

Our UHD multicast distribution platform enables virtually latency-free (1 frame) HDMI video distribution over a 1Gb network switch.

The IP200UHD-RX is an industry-leading 4K HDCP 2.2 HDMI video upscaling receiver that, using visually lossless compression technology, delivers HDMI, bi-directional IR, RS-232 and USB/KVM up to 100m lengths over a standard network architecture.

The IP200UHD-RX can be powered via PoE from the network switch or locally if the switch doesn't support PoE. With multiple configuration options available, the multicast solution is ideal for both commercial and residential installations.

• Advanced UHD video over 1 Gb network
• Virtually unlimited system size
• Extends HDMI up to 100m over a single CAT cable
• Video upscaling and downscaling
• Supports UHD video output up to 4K at 30Hz
• Supports all popular HDMI audio formats, including Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio pass-through
• Advanced signal management for independent routing of IR, RS-232, USB/KVM*, audio and video
• PoE (Power over Ethernet) to power Blustream products from a PoE switch
• HDCP 2.2 compatible with advanced EDID management
• Analog L/R audio output
• LAN loop output for one-to-many extender mode
• Local 24-56V power supply (if Ethernet switch does not support PoE) - sold separately
• It has 4 operating modes:
- Matrix distribution (requires 1 Gb network switch)
- Video wall (requires 1 Gb network switch)
- One-to-one HDMI extender (no network switch required)
- One-to-many HDMI extender (no network switch required)

• Video input connectors: 1 RJ45 LAN connector
• Video output connectors: 1 HDMI type A, female
• Latency: 1 frame (16-33 ms depending on frame rate)
• Audio output connectors: 2 RCA L/R analog audio
• Ethernet port: 1 RJ45 LAN connector (video extension)
• RS-232 serial port: 1 3-pin Phoenix connector
• USB/KVM port: 2 USB, type A
• IR input ports: 1 x 3.5mm stereo jack
• IR output ports: 1 x 3.5mm mono jack
• PoE consumption: 7.0 W (typical), 8.3 W (maximum load)
• Firmware update (MCU): 1 micro-USB
• Mounting kit included
• Dimensions (W x D x H): 190 mm x 114 mm x 25 mm
• Shipping weight: 0.8 kg
• Operating temperature: 32°F to 104°F (0°C to 40°C)
• Storage temperature: -4°F to 140°F (-20°C to 60°C)